county line 25 ton log splitter manual

Specific Warnings and Hazard Precautions

The log splitter’s engine emits carbon monoxide; operate outdoors only. Never modify the splitter or exceed its 25-ton capacity. Keep loose clothing tied back; Avoid overreaching or standing in the wedge’s path. Ensure all decals are intact and followed. Disconnect the power source before performing maintenance. Always use approved hydraulic oil to prevent system damage. Regularly inspect for wear and tear to ensure safe operation.

Assembly and Initial Setup Instructions

This manual provides step-by-step guidance for assembling and setting up the County Line 25 Ton Log Splitter, including required tools, hydraulic oil specifications, and pre-operation safety checks.

Step-by-Step Assembly Process

• Begin by unpacking and inventorying all components, ensuring no parts are missing or damaged.
• Attach the 2-ball coupler to the log splitter for secure towing and transport.
• Install the hydraulic cylinder, ensuring proper alignment and connection to the control valve.
• Mount the control valve lever, enabling precise control over the splitting wedge’s movement.
• Connect the external hydraulic oil filter to maintain clean oil flow and system longevity.
• Follow the manual’s instructions to assemble the beam and wedge, ensuring all bolts are tightened securely.
• Double-check all connections and perform a test cycle before first use to ensure proper function and safety.

Required Tools and Initial Setup Checklist

• Gather essential tools: wrench, pliers, hydraulic oil, and a Class A fire extinguisher.
• Check the hydraulic oil level and top it off if necessary.
• Inspect hydraulic hoses for damage and ensure all connections are secure.
• Attach the 2-ball coupler for towing, if applicable.
• Ensure the work area is clear, firm, and level.
• Review the safety guidelines in the manual before operation.

Operating the County Line 25 Ton Log Splitter

Start the engine, ensure hydraulic oil levels are adequate, and operate with proper techniques for efficient log splitting while adhering to safety guidelines outlined in the manual.

Starting the Engine and Preparing for Use

Before starting, ensure the hydraulic oil level is adequate and the work area is clear. Locate the ignition switch, turn it to the “on” position, and pull the starter cord firmly. Allow the engine to warm up for a few minutes. Check the hydraulic fluid level and ensure all safety guards are in place. Always follow the manual’s guidelines for safe operation.

Proper Technique for Splitting Logs

Position the log on the splitter’s beam, ensuring it is centered and secure. Align the wedge with the log’s center, making sure the log is no longer than 25-1/2 inches. Engage the hydraulic system slowly, maintaining control throughout the cycle. Always keep hands and loose clothing away from moving parts. Stop immediately if the log shifts or if resistance is excessive. Follow the manual’s guidelines for optimal results and safety.

Maintenance and Servicing

Regular maintenance ensures optimal performance and longevity. Check hydraulic fluid levels, replace filters, and inspect for wear. Lubricate moving parts and sharpen the wedge as needed.

Regular Maintenance Tasks for Optimal Performance

Regular maintenance is crucial for ensuring the log splitter operates efficiently. Check hydraulic fluid levels and top them off as needed. Replace hydraulic filters every 50 hours of use to maintain system performance. Inspect hoses and connections for damage or leaks. Lubricate all moving parts, such as the wedge and cylinder, to prevent wear. Sharpen the wedge periodically to maintain splitting effectiveness. Always follow the manufacturer’s recommendations for replacement parts and schedules; Wearing gloves is advised during maintenance to protect against sharp edges. Ensure the log splitter is turned off and cool before performing any maintenance tasks. Regularly inspect and replace worn components to prevent downtime. Store the log splitter in a dry, protected area during off-seasons to prevent rust and damage.

Hydraulic System Care and Oil Replacement

Regularly check hydraulic fluid levels and top them off with the recommended oil type. Replace hydraulic filters every 50 hours of operation to maintain system efficiency. Inspect hoses and connections for leaks or damage. Use a high-quality hydraulic oil to ensure optimal performance and prevent system damage. Refer to the manual for guidance on oil replacement and filter maintenance. Always clean or replace the hydraulic filter to maintain proper flow and pressure. Ensure the hydraulic cylinder is free from debris and well-lubricated for smooth operation. Follow the manufacturer’s recommendations for hydraulic system care to extend the lifespan of your log splitter.

Troubleshooting Common Issues

Identify common problems like hydraulic malfunction or engine issues. Refer to the manual for solutions or contact technical support for professional assistance andparts replacement guidance.

Identifying and Resolving Common Problems

Common issues with the County Line 25 Ton Log Splitter include hydraulic system malfunctions, engine trouble, or improper log splitting. Always refer to the manual for diagnostic guidance. If problems persist, contact technical support at 1-800-525-8322 for professional assistance. Regular maintenance, such as checking hydraulic oil levels and ensuring proper wedge alignment, can prevent many issues. Addressing problems promptly ensures optimal performance and safety.

Contacting Technical Support for Assistance

For unresolved issues, contact County Line’s technical support at 1-800-525-8322. Ensure you have your model number, purchase date, and detailed issue description ready. Visit www.southlandpowerequipment.com for additional resources or to find electronic versions of the manual. Prompt assistance is available to address any operational or maintenance concerns, ensuring your log splitter functions optimally and safely.

Parts Diagram and Components Identification

This section provides a comprehensive overview of the log splitter’s components, including the hydraulic cylinder, control valve, and wedge, ensuring proper identification for maintenance and repairs.

Understanding the Log Splitter’s Components

The County Line 25 Ton Log Splitter comprises essential components like the hydraulic cylinder, control valve, and splitting wedge. The hydraulic cylinder generates the force needed for splitting logs, while the control valve manages the movement of the wedge. The 8-inch hardened steel wedge is designed for efficient log splitting. Understanding these parts ensures proper maintenance and operation, maximizing the splitter’s performance and lifespan.

Locating and Ordering Replacement Parts

Refer to the parts diagram in the manual to identify components needing replacement. Genuine parts can be ordered through authorized dealers or online platforms. Contact customer support at 1-800-525-8322 for assistance. Ensure to use manufacturer-recommended parts to maintain safety and performance. Always verify part numbers and compatibility before ordering to ensure proper fitment and functionality of your log splitter.